Eye splicing Dyneema is simple and easy to do! In the past, I have shown pictures demonstrating the various steps to accomplish this result, but now I have a video of the process!
Victory Break
The head is done!
The galley is done!
The topsides are done!
The deck is done! *almost
It’s time for a relaxing lunch to celebrate the progress we have made. In town, there is a quaint restaurant that serves the most delicious cheese on toast. This is a wonderful way to celebrate our little victory on the projects list!
Galley Refit: Completion
The galley is done! The wood working and counter top making ended a while ago, but the stove and oven were somewhere in the mail. Without them, I could not “finish” the galley refit, as a galley without a stove is nothing more than a sink.
Our new stove and oven are an older Origo 6000 alcohol system that fit nicely into the space provided. One of my friends has this same stove in his boat and he highly recommended this unit for our new stove. The best part of the unit is that the entire system is gimballed which will allow us to cook much more comfortably while making a passage.
With the stove and oven installed, our galley is finished! This project proceeded much faster than the head refit partly because I was working exclusively in wood, instead of a combination of fiberglass and wood, and because the final design was well thought out before the project began.
The head refit was a nebulous idea that morphed along as the project evolved. Every time I went to attach something permanent, we would look at the proposal and wonder how it would affect everything down the line. I always worried that what I built today would be removed tomorrow due to a change of plans. This led to a much more cautious approach which was also a much slower process.
The galley was anything from an evolving concept. We had the sink, all the wood, and the stove; though the stove was in the mail. The plan was well thought out and the goal was to finish as soon as possible because our end date was fast approaching and this wasn’t the final project for the boat.
With sure thought and a sound plan, the galley came to be in a very short amount of time which also allowed us to get our boat back into living condition with a relatively minor upset in the timeline.
Wood Plugs
One of the finer details of woodworking on a boat is to hide the screws. Making a piece of furniture is enough of a project, but hiding all of your mechanical fasteners takes your skill to a whole new level!
I had read about wood plugs but honestly had never actually given them a try.
The concept is simple: countersink the screw into the wood and then plug the hole above the screw with a wooden plug. The question that should arise in your mind are: What holds the wood plug in place?
The answer is going to vary depending on who you ask. Some people swear by friction alone, others tout only using varnish, yet others love to glue the plug in securely with wood glue.
My thoughts on the three options: Nothing, Varnish, and Glue.
If you rely on friction, you better hope that the furniture will always live in a moist environment. As the wood dries, the wood will shrink and the plug will fall out. Maybe not today, but at some point, it will just fall out.
Varnish works as a weak adhesive, but more as a luting agent which simply fills any air pockets and holds the plug in with suction. This method is the equivalent of licking a playing card to hold it to your forehead. Yes, it is “glued” but it is not permanent. If you need to access the screw below, you just pop it out and get straight to the screw.
Wood glue is the last option and offers the most secure method of holding it since it will be glued in just like all the other pieces of wood in the furniture. This means that the plug will never come out but it also means that if you need access to the screw, you are going to regret having used glue!
Since this is my very first time using wood plugs, I was concerned that I might have messed something up and might need to gain access to the screws to remove or relocate the strips of wood. If for any reason I need access, I don’t want to destroy everything just to get to the screws, so I chose varnish.
I also cut out some extra plugs so that if I like how it all is working, and if the plugs fall out and are lost, I can replace them with new plugs and with wood glue. I just have issue with permanent things, so the retrieve-ability of the plug with varnish really appealed to me. Once I know that I like the furniture there on the deck like it is, I will consider replacing the varnish with wood glue, but for my first attempt at plugs, I wouldn’t want to bury my comfort in permanent glue.
Olive Oiling Cutting Boards
We had enough leftover wood to build a set of cutting boards. I glued the planks together and then had the wood shop rip the block in half to create two thinner cutting boards. These are functional, but they could be prettier.
Instead of oiling them with linseed oil, like I did the counter top, I decided to use Olive Oil. I got the idea from a comment on one of our YouTube videos, where someone mentioned that he oiled a piece of wood with olive oil because it is food safe.
The olive oil was simply poured onto the surface of the wood and then spread around.
As I spread the oil, the grain just popped! It was so beautiful.
The end result is a set of beautiful cutting boards and two trivets that we can use for random things. I pictured us setting hot pots on them, Maddie envisioned us using them as cheese boards. The beauty of a pretty piece of wood is you can do anything you want with them because they are so versatile!
